Corning Ware

"P" Series

Blue Cornflower Pattern

 

 

Beverage Servers & Drip Coffee Makers

Corning Ware 4 Cup Beverage Server

No part number found for this series of beverage servers.

4 Cup Capacity / Weight: 1 pound, 4.2 ounces.

Dimensions: 4" Round at base - 6" Tall

Introduced in 1965 and sold for $4.95, they were not shown in the 1967 catalog.


Corning Ware 8 Cup Beverage Server

No part number found for this series of beverage servers.

8 Cup Capacity / Weight: 1 pound, 13.2 ounces.

Dimensions: 5" Round at base - 7" Tall

Introduced in 1965 and sold for $6.95, they were not shown in the 1967 catalog.


Corning Ware P-504 Brew 'N' Serve

4 Cup Capacity / Weight: 1 pound, 3.2 ounces.

Dimensions: 4" Round at base - 6" Tall

The Beverage Servers came back with a new design in 1971, now called Brew 'N' Serve.

New shape with different handles, they only stayed around for about a year.


Corning Ware P-508 Brew 'N' Serve

8 Cup Capacity / Weight: 1 pound, 15.2 ounces.

Dimensions: 5 Round at base - 7" Tall

The Beverage Servers came back with a new design in 1971, now called Brew 'N' Serve.

New shape with different handles, they only stayed around for about a year.


Corning Ware P-114 Drip Coffee Maker

4 Cup Capacity / Weight: 1 pound 13.4 ounces including internals and pot.

Dimensions: Upper bowl: 4" Round at base - All parts: 10" Tall  

 How to use the P-114 Drip Coffee Maker:

Heat water in the base that looks just like the P-104.

Place coffee grounds in basket, screw to bottom of glass bowl.

Insert plastic valve into glass bowl to seal opening at bottom.

Pour hot water to the 4 cup line, discard any extra water.

Remove lid from base and place filled assembly on top of pot.

Remove plastic valve to start water dripping and place lid on top of bowl.

Brewing takes about 5 minutes.

Remove basket / bowl assembly and replace lid on base.

Pour and enjoy a perfect Cuppa Joe.

 

Special Note:

The P-114 & the P-118 are sometimes incorrectly called a Drip-O-lator on major online auction sites.

The Corning Ware P-114 & P-118 are called Drip Coffee Makers.

Drip-O-lator is a registered trademark of The Enterprise Aluminum Company.


Corning Ware P-118 Drip Coffee Maker

8 Cup Capacity / Weight: 3 pounds 9.8 ounces including internals and pot.

Dimensions: Upper bowl: 5" Round at base - All parts: 12" Tall

Instructions for use are similar to the P-114 shown above.

Photograph to the right shows the P-114 and the P-118

for size comparison.


Corning Ware P-106 Filter Drip Coffee Maker

6 Cup Capacity - Uses filter part # 7186-FP.
Shown with metal lid, P-106-FC filter cone, 20 filters and instruction booklet.
Dimensions: 7" Tall  - 6" Diameter
Weight with lid and cone: 1 pound, 14 ounces.

This coffee maker can also use standard #4 cone style coffee filters, available at finer stores everywhere.

How to use the P-106 Drip Coffee Maker:

Place filter cone in the Corning Ware filter drip coffee maker.

Place filter paper in cone, spread filter paper open to line filter cone.

Measure drip grind coffee into filter paper, use two level tablespoons per cup.

In a separate vessel, heat to boiling 6 ounces of water per serving. 

Pour of the boiling water in a slow circular motion over the grounds.

Allow to drip through, then repeat with remaining water.

When done dripping, remove filter cone and replace lid.

Pour and enjoy another perfect Cuppa Joe.

The P-106 model number is also used for a 6 cup percolator.


Corning Ware P-186 Filter Drip Coffee Maker

6 Cup Capacity / Weight: 1 pound, 7.2 ounces.

Dimensions: 5" Round at base - 6" Tall

Shown with the P-186-FP Filters and original box.

Filter paper holder is made by Melitta.

Directions for use are the same as the P-106 Drip Coffee Maker shown above.

 

 

Return To: Home Page or Quick Index